Cable Opening Tools

K-ACS-1 Double-Handle Armored Cable Slitter

The two-hand armored slitter: a grip at each end of the bridge keeps the gold roller square on heavy cables from 8 to 28.6 mm over long slits, so the blade tracks straight through jacket and armor where a single handle would wander — the same depth dial and 90° slit-or-ring head, fed by both hands.

Cable diameter

8–28.6 mm

Guide roller

Gold anodised aluminium roller

Blade

Hardened alloy steel, replaceable

Blade depth

Adjustable to 5.5 mm maximum

Cutting modes

Longitudinal slit and circumferential ring cut — blade rotates 90° on its lever

Send Inquiry WhatsApp UsK-ACS-1 Datasheet (PDF)

Key features

• Two grips, one straight line: a knurled handle at each end of the bridge lets both hands feed the tool together, holding the roller square on the cable over long slits where one hand would let the head yaw off the cut line
• Gold roller, full-size range: cables from 8 to 28.6 mm — the heavy feeder and trunk constructions — ride in the grooved centre roller while the frame bridges over the work
• Jacket and armor in one pass: the hardened alloy steel blade scores through the polyethylene jacket and the corrugated copper, steel or aluminium armor together, opening the cable in a single draw
• Depth set to the cable, not guessed: blade protrusion adjusts to 5.5 mm maximum — set it on a scrap end first, so the cut stops at the armor and the loose tubes inside stay untouched
• Slit or ring with one lever: flip the blade 90° to switch between a lengthwise slit and a circumferential ring cut — mid-span windows and end entry from the same central head
• Supplied neutral and unbranded as standard; private labeling is made to your requirements — labels with your logo, part numbers and barcodes on the inner boxes and outer cartons, so the goods arrive ready for your warehouse

Specifications

Documents

• K-ACS-1 Datasheet (PDF) (PDF)