Cleaning consumables, fast connectors and adapters, and the crimping tools that finish the job.
The box that lives on every splicing bench: 280 lint-free delicate task wipes for end faces, ferrules and bare fiber.
View KW-280 →
One push cleans an LC or MU end face — through the adapter or in your hand — with a fresh strand of cleaning…
View K-LC →
One push cleans an SC, FC or ST end face — through the adapter or in your hand — with a fresh strand of cleaning…
View K-SC →
One push cleans a whole MPO/MTP ferrule — all fibers at once, male or female, in the adapter or in your hand —…
View K-MPO →
A bench cassette that wipes SC, FC, ST and LC end faces on fresh microfiber tape — 550+ cleans on one core, and…
View K-CB550 →
The spare cleaning core for the K-CB550 box — same dry microfiber tape, 550+ cleans, swapped in seconds with no tools.
View K-CB550R →
Handheld fiber end-face inspection microscope in 100X, 200X and 400X versions, with 2.5mm and 1.25mm adapters —…
View KX-24 →
Field assembly SC connectors in APC and UPC — a whole family of housings from 45 to 60 mm, terminated with the…
View KW-01 →
The full adapter range — SC, LC, FC, ST, E2000 and MPO couplers plus hybrid adapters — in simplex, duplex and…
View product →
The LC in fast-connector form — field assembly LC/APC and LC/UPC in drop-cable, general, round-cable and 0.9 mm…
View KW-02 →
Field assembly FC connectors with the crocodile-mouth clamp — 55 mm, in APC and UPC, for the FC ports still all…
View KW-03 →
Splice-on SC connectors: fusion-welded in the splicer for a true fused joint, in a 58 mm type and a 0.9 mm type,…
View KW-04 →
Splice-on LC connectors for 0.9 mm fiber — a fused LC termination made in the splicer, in APC and UPC.
View KW-05 →
Splice-on FC connectors, 55 mm — a fusion-welded FC termination in APC and UPC for test gear and legacy plant.
View KW-06 →
The 90 mm mechanical cold splice that joins two fibers with no splicer and no power — in ceramic and metal…
View KW-07 →
Hardened MINI SC connectors with an IP68 shell — fast-connector termination inside, weatherproof outside, for…
View KW-08 →
Full-size hardened SC waterproof connectors — the large-interface IP68 shell that mates the hardened ports on…
View KW-09 →
Waterproof connectors terminated in the factory, not the field — MINI SC and full-size hardened SC heads on…
View KW-10 →
One palm-size rotary stripper for the two round cables of every install: coax prepped for its F-connector in three…
View K-MS1 →
The ratchet version of the modular crimper: 8P, 6P DEC and 4P dies, built-in 6 mm and 12 mm strip gauges, and a…
View K-RJ10 →
Crimp, trim, cut and strip with one ratchet tool: 8P pass-through plugs are crimped and trimmed flush in a single…
View K-RJ86 →
A compact vertical-action crimper for the plugs a standard pliers tool handles badly: shielded Cat6A and Cat7 RJ45…
View K-C7A →
A compression tool for F-type connectors on RG59, RG6 and RG11 — one squeeze presses the sleeve home for a…
View K-CX59 →
A ratchet hex crimper with quick-change dies — the photographed set crimps 1.5, 2.5 and 6 mm² terminals and coax…
View K-CX3 →
The compact compression tool for everyday RG6 and RG59 F-connector work — short body, fixed stroke, nothing to…
View K-CX2 →
One crimper for the three modular plug sizes — 8P RJ45, 6P and 4P — that crimps, strips and cuts in a single tool,…
View K-RJ45 →Tell us the models and rough quantities — we will reply with availability and your options.