KW-05 LC/APC hot-melt splice-on connector with protection sleeve

Cleaning, Connectors & Crimping

KW-05 LC Hot-Melt Connectors KW-05 — LC/APC & LC/UPC Splice-On 0.9 mm

Splice-on LC connectors for 0.9 mm fiber — a fused LC termination made in the splicer, in APC and UPC.

Connector type: LC hot-melt (splice-on) connector, fusion terminated
Variants: LC/APC (green) · LC/UPC (blue)
Version: 0.9 mm type
Fiber: Single-mode G.652D / G.657A
Applicable cable: 0.9 mm tight-buffered fiber

Send Inquiry WhatsApp Us KW-05 Datasheet (PDF)

Key features

Fusion-welded LC termination for 0.9 mm tight-buffered fiber
LC/APC (green) and LC/UPC (blue), factory-polished 1.25 mm ferrules
Heat-shrink protection sleeve included with every connector
Insertion loss typical ≤0.3 dB after fusion; return loss ≥55 dB UPC and ≥60 dB APC
The LC answer when the mechanical KW-02 is not the joint the job specifies

Specifications

Connector type	LC hot-melt (splice-on) connector, fusion terminated
Variants	LC/APC (green) · LC/UPC (blue)
Version	0.9 mm type
Fiber	Single-mode G.652D / G.657A
Applicable cable	0.9 mm tight-buffered fiber
Ferrule	Zirconia ceramic, 1.25 mm
Insertion loss	Typical ≤0.3 dB after fusion (1310 / 1550 nm)
Return loss	UPC ≥55 dB · APC ≥60 dB
Operating temperature	-40°C to +75°C
Termination	Fusion splicer + heat-shrink sleeve (included)

Where it works

LC pigtails and panel cords made to length on site
High-density LC plant terminated during fit-out
Repair of LC cords without stocking every length

In the box

KW-05 hot-melt connector ×1 (polish as ordered)
Heat-shrink protection sleeve ×1

Documents

KW-05 Datasheet (PDF) (PDF)

More cleaning, connectors & crimping

KW-02 LC/UPC fast connector parts with the length-setting jig

KW-02 LC Fast Connectors KW-02 — LC/APC & LC/UPC Field Assembly

The LC in fast-connector form — field assembly LC/APC and LC/UPC in drop-cable, general, round-cable and 0.9 mm…

KW-04 SC/APC hot-melt splice-on connector parts with protection sleeve

KW-04 SC Hot-Melt Connectors KW-04 — SC/APC & SC/UPC Splice-On

Splice-on SC connectors: fusion-welded in the splicer for a true fused joint, in a 58 mm type and a 0.9 mm type,…

SD-6A fusion splicer angled view with touchscreen and splice chamber

SD-6A Fusion Splicer

The compact crew splicer: 4-motor core alignment and a 6-second fully automatic splice, with a power meter and VFL…

K-MS1 network and coax cable stripper top view showing the blade window, thumb pad and finger ring

K-MS1 Network & Coax Cable Stripper

One palm-size rotary stripper for the two round cables of every install: coax prepped for its F-connector in three…

Ask about the KW-05

Tell us the quantity you are planning — we will reply with availability and your options.