K-MS1 network and coax cable stripper top view showing the blade window, thumb pad and finger ring

Cleaning, Connectors & Crimping

K-MS1 Network & Coax Cable Stripper

One palm-size rotary stripper for the two round cables of every install: coax prepped for its F-connector in three turns, network jackets off without a nicked pair.

Coaxial cables: RG59 / RG6 / RG7 / RG11
Coax stripping: Reversible blade cassette — one side RG59/6, the other RG7/11; three blades; 6 mm stripping distance per section
Network cables: UTP / STP round cable and Cat5 round telephone cable — jacket stripping
Flat cable: Flat telephone cable stripping
Cutter: Built-in cable cutter

Send Inquiry WhatsApp Us K-MS1 Datasheet (PDF)

Key features

The reversible cassette is the whole coax range in one tool: one side strips RG59 and RG6, flip it over for RG7 and RG11 — the three blades step the jacket, dielectric and conductor back at a fixed 6 mm each, which is exactly the preparation an F-connector wants
Rotary stripping with a finger ring: squeeze the cable in, put a finger through the ring and spin — the blades travel around the cable at a constant depth, so the cut is even all the way round instead of deep where your thumb pressed hardest
The second hole is for round network cable: UTP and STP jackets and Cat5 round telephone cable strip in one to three turns, the blade depth adjustable so the pairs inside stay un-nicked — a scored pair is a link that fails at certification, not at stripping
Flat telephone cable strips between the blades, and a cutter is built in, so the tool covers the full copper prep bench: coax, network, telephone, cut and strip
Blade depth adjusts for the real spread of jacket thicknesses across brands — set it once on a scrap piece of the cable you are actually running, and every end after it comes out the same
Palm-size ABS body with no handles to open: it lives in a pocket or a pouch slot, weighs almost nothing, and the cassette swaps when the blades finally dull instead of the tool being thrown away
Private labeling made to your requirements — labels with your logo, part numbers and barcodes on the inner boxes and outer cartons, ready for your warehouse

Specifications

Coaxial cables	RG59 / RG6 / RG7 / RG11
Coax stripping	Reversible blade cassette — one side RG59/6, the other RG7/11; three blades; 6 mm stripping distance per section
Network cables	UTP / STP round cable and Cat5 round telephone cable — jacket stripping
Flat cable	Flat telephone cable stripping
Cutter	Built-in cable cutter
Blade depth	Adjustable for different jacket thicknesses
Blades	SK5 steel, in a replaceable cassette
Body	High-impact ABS palm body with finger ring for rotary stripping

Where it works

Preparing RG6/RG59 coax for F-connectors in satellite, CCTV and cable-TV work — jacket, dielectric and conductor exposed in the right steps
Stripping UTP/STP network cable jackets before crimping or punching down, without nicking the pairs
Telephone and intercom cabling: round Cat5 and flat satin cord in the same tool
A pocket stripper for combined network + coax installers who do not want a separate tool per cable family