K-CB550 fiber cleaning box cassette cleaner in green, with the blue tape-advance slide on top

Cleaning, Connectors & Crimping

K-CB550 Fiber Cleaning Box K-CB550 (Cassette Type)

A bench cassette that wipes SC, FC, ST and LC end faces on fresh microfiber tape — 550+ cleans on one core, and when the core is done you swap the core, not the box.

Type: Cassette (reel) type end-face cleaner, lever tape advance
Connectors: SC, FC, ST, LC — also D4, MU, MT, DIN (per body label)
Ferrule sizes: 2.5 mm and 1.25 mm
Polish types: UPC and APC
Cleans per core: 550+

Send Inquiry WhatsApp Us K-CB550 Datasheet (PDF)

Key features

550+ cleans per core: every wipe runs on fresh, unused microfiber tape, so clean number 550 is wiped exactly like clean number one
The core swaps, not the box: when the tape is spent, open the case, fit a replacement core and keep working — the cheapest cost per clean in the cleaning drawer
One slot takes the whole bench: SC, FC, ST and LC, 2.5 mm and 1.25 mm ferrules, UPC and APC — the body label also lists D4, MU, MT and DIN
Dry cleaning — no alcohol to carry, spill or wait on, and no solvent residue left on the end face
Made for volume work: production lines, repair benches and panel dressing, where connectors are cleaned by the hundred, not one at a time

Specifications

Type	Cassette (reel) type end-face cleaner, lever tape advance
Connectors	SC, FC, ST, LC — also D4, MU, MT, DIN (per body label)
Ferrule sizes	2.5 mm and 1.25 mm
Polish types	UPC and APC
Cleans per core	550+
Cleaning core	Replaceable — swap the core, keep the box; replacement cores available
Cleaning medium	Dry microfiber tape — no alcohol or solvents
Body	Green or blue housing
Dimensions	125 × 85 × 35 mm
Weight	167 g

Where it works

Jumper and pigtail production lines — clean every end face before test and packing
Repair and refurb benches: bulk cleaning of returned jumpers and adapters
Panel dressing and commissioning: work through a full ODF or distribution panel in one session
Field kits that see volume: pair with one-click pens — the box for the bench and panel work, the pens for the pole and the premises