Cable Opening Tools

K-LS1 Loose Tube Longitudinal Stripper

A solid box that swallows the tube and slits it into two halves: feed the loose tube through the hole that matches it — 1.5–1.9, 2.0–2.4, 2.5–2.9 or 3.0–3.3 mm — close the hinged lid, and draw the box along. The alloy blade inside splits the tube wall lengthwise, ready to peel away from the fibers.

Holes

4 — for tube OD 1.5–1.9 / 2.0–2.4 / 2.5–2.9 / 3.0–3.3 mm

Blade

Alloy blade

Blade setting

Factory pre-set, no adjustment

Body

Moulded plastic box, hinged lid with steel pin

Dimensions

74 × 74 × 30 mm

Send Inquiry WhatsApp UsK-LS1 Datasheet (PDF)

Key features

• Four holes through the edge, one for each standard loose tube: 1.5–1.9, 2.0–2.4, 2.5–2.9 and 3.0–3.3 mm — the tube itself passes through the box, so it is guided straight and cannot wander off the blade line
• Slits the tube into two halves: the alloy blade is set inside at the factory to score the wall along the draw, and the tube peels apart into two clean halves that lift away from the fiber bundle
• Hinged lid on a steel pin: the box opens to lay the tube in — no threading a long tube end through anything — then closes and stays closed under hand pressure while you pull
• A palm-size bench tool at 74 mm square: the flat faces sit steady in the hand or on the closure lid, and the recessed panels in the lid serve as thumb rests for the draw
• Nothing to set or lose: blade depth is fixed at the factory, there are no loose parts, and the closed box keeps the blade covered in the kit
• Supplied neutral and unbranded as standard; private labeling is made to your requirements — labels with your logo, part numbers and barcodes on the inner boxes and outer cartons, so the goods arrive ready for your warehouse

Specifications

Documents

• K-LS1 Datasheet (PDF) (PDF)