Fiber Strippers

K-RCS158 Round Cable Stripper

Rotary stripper for round cables of 19–40 mm diameter: a spring-loaded brace, an adjustable blade, and ring, spiral or longitudinal cuts at the end or mid-span.

Cable diameter

19–40 mm

Jacket materials

PE, PVC, rubber and other jacket materials

Cut types

Radial (ring), spiral and longitudinal — at cable ends and mid-spans

Cable brace

Spring-loaded — wedges the cable against the blade for a controlled cut

Blade depth

Adjustable — knurled knob at the head

Send Inquiry WhatsApp UsK-RCS158 Datasheet (PDF)

Key features

• Strips round cables from 19–40 mm — the diameter is the specification that matters on this tool, and it is stated in full: every round distribution, feeder and drop cable in that range goes through the same brace
• Spring-loaded cable brace wedges the cable firmly against the blade, so the cut runs at a controlled, even depth all the way round — no wandering score line, no second pass
• Blade depth is set on the knurled knob at the head: dial it to the jacket thickness in front of you and the blade cuts the jacket only, stopping above the shield, the strength members and the fibers
• Three cuts from one tool: rotate it for a ring cut, draw it along for a longitudinal slit, or walk it in a spiral — the spiral cut is what opens a mid-span window without ringing the cable through
• Works at cable ends and mid-span alike, on PE, PVC and rubber jackets — the everyday sheaths of round fiber and copper cables
• 138 mm ergonomic handle at about 100 g: it lives in a pocket or a kit pouch and comes out for the thirty seconds the job takes, with no setup and nothing to charge
• Need the other half of the range? The K-RCS114 covers 4.5–29 mm — the two sizes together strip round cables from 4.5 mm to 40 mm
• Private labeling made to your requirements — labels with your logo, part numbers and barcodes on the inner boxes and outer cartons, ready for your warehouse

Specifications

Documents

• K-RCS158 Datasheet (PDF) (PDF)