Fiber Strippers

K-SI-01 K-SI-01 Longitudinal Cable Stripper

Two opposed blades score the jacket of round cables from 10 to 25 mm while the core stays untouched: set the blade depth to the sheath thickness on the graduated cartridges, close the tool anywhere along the cable, and pull — the jacket parts along the score lines and lifts away from the tubes inside.

Longitudinal range

10–25 mm cable diameter

Transverse range

4–28 mm cable diameter

Cable types

Round fiber optic cables — loose-tube and armored constructions, 2–288 cores; PVC and PE sheaths

Blade depth

Set with the knurled wheels on both faces — each wheel drives its blade cartridge in or out, so the blade scores the sheath without reaching the tubes inside

Blade cartridges

Two opposed cartridges, replaceable; two spare cartridges included

Send Inquiry WhatsApp UsK-SI-01 Datasheet (PDF)

Key features

• Opens the jacket without opening the cable: two opposed blades score the sheath along two lines as the tool is drawn along, so the jacket parts and lifts away — the loose tubes, fibers and strength members inside are never touched by an edge
• Blade depth is set to the sheath, not guessed: the knurled wheels on both faces drive the blade cartridges in and out, and the scale stamped on each cartridge shows the setting — thick armored sheaths and thin PE jackets on the same bench
• Longitudinal cuts on cables from 10 to 25 mm, and transverse ring cuts from 4 to 28 mm with the same blade setup — end stripping and mid-span windows with one tool
• Clamps on anywhere along the cable run: open a window mid-span to reach one tube, or work from the end — no need to thread the cable through anything
• Replaceable blade cartridges — two spares are included in the box, and a worn blade is swapped in seconds instead of retiring the tool
• Private labeling made to your requirements — labels with your logo, part numbers and barcodes on the inner boxes and outer cartons, ready for your warehouse

Specifications

Documents

• K-SI-01 Datasheet (PDF) (PDF)